JUNOS OS 10.4 Release Notes
140
Class-of-Service Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and J Series devices, the following
class-of-service hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set class-of-service classifiers ieee-802.1ad
set class-of-service interfaces interface-name unit 0 adaptive-shaper
Ethernet-Switching Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
ethernet-switching hierarchy CLI commands are not supported. However, if you enter
these commands in the CLI editor, they appear to succeed and do not display an error
message.
set ethernet-switching-options bpdu-block disable-timeout
set ethernet-switching-options bpdu-block interface
set ethernet-switching-options mac-notification
set ethernet-switching-options voip interface access-ports
set ethernet-switching-options voip interface ge-0/0/0.0 forwarding-class
Firewall Hierarchy
On SRX100, SRX210, SRX220, SRX240 SRX650, and all J Series devices, the following
Firewall hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set firewall family vpls filter
set firewall family mpls dialer-filter d1 term
Interfaces CLI Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
interface hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error message.
Aggregated Interface CLI on page 141
ATM Interface CLI on page 141
Ethernet Interfaces on page 142
GRE Interface CLI on page 142
IP Interface CLI on page 143
Copyright © 2011, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOS OS 10.4 - RELEASE NOTES REV 6 and is the answer not in the manual?