Table 179: Show Chassis Nonstop-Upgrade Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show chassis nonstop-upgrade
Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show chassis show chassis
nonstop-upgrade nonstop-upgrade
Copyright © 2010, Juniper Networks, Inc.
show chassis nonstop-upgrade
Command introduced in Junos OS Release 10.4 for EX Series switches.
(EX8200 switches only) Display the status of the line cards after the most recent nonstop
software upgrade (NSSU). This command must be issued on the master Routing Engine.
view
request system software nonstop-upgrade on page 1222
Upgrading Software Using Nonstop Software Upgrade (CLI Procedure) on page 1197
show chassis nonstop-upgrade on page 1225
Table 179 on page 1225 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.

Table 179: show chassis nonstop-upgrade Output Fields

Field Name Field Description
Item Line card slot number.
Status State of line card:
Online
Offline
Reason Reason for the state (if the line card is offline).
user@switch> show chassis nonstop-upgrade
Item Status
FPC 0 Online
FPC 1 Online
FPC 2 Online
FPC 3 Offline
FPC 4 Online
FPC 5 Online
FPC 6 Online
FPC 7 Online
Chapter 55: Operational Commands for High Availability
show chassis nonstop-upgrade
—Line card is online and running.
—Line card is powered down.
Reason
Offlined by CLI command
1225