Source - Juniper JUNOS 10.1 - CONFIGURATION GUIDE 1-2010 Configuration Manual

JUNOS 10.1 Network Interfaces Configuration Guide

source

source source-address;
Syntax
Hierarchy Level [edit interfaces interface-name unit logical-unit-number tunnel address],
[edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number
Statement introduced before JUNOS Release 7.4.
Release Information
Specify the source address of the tunnel.
Description
If you do not specify a source address, the tunnel uses the unit s primary address as
Default
the source address of the tunnel.
Options source-address
interface—To view this statement in the configuration.
Required Privilege Level
interface-control—To add this statement to the configuration.
Related Topics
1432
source
tunnel address]
—Address of the local side of the tunnel. This is the address that is
placed in the outer IP header s source field.
multicast-only on page 1279
primary (Address on Interface) on page 1364
JUNOS Services Interfaces Configuration Guide