Configuring Custom Log Filters (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Configuring Custom Log Filters (NSM Procedure)

218
Table 62: SNMP Agent Configuration Details (continued)
Option
SNMP Traps
System Name
System Location
System Contact
Community
Configuring Event Logs (NSM Procedure) on page 212
Configuring User Access Logs (NSM Procedure) on page 213
Configuring Administrator Access Logs (NSM Procedure) on page 214
Configuring Client-Side Logs (NSM Procedure) on page 216
You can create custom log filters or edit the set of predefined log filters to specify which
data is written to your log files as well as its format.
To configure the log filters:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure log filter.
Click the Configuration tab. In the configuration tree, select System > Log/Monitoring
3.
> Filters.
Add or modify settings as specified in Table 63 on page 218.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 63: Log Filter Configuration Details
Option
Filter Name
Function
Specifies the SNMP traps
for the Infranet Controller.
Specifies the agent name.
Specifies the agent
location.
Specifies the agent
contact information.
Specifies the agent
community.
Function
Specifies a name for the
filter.
Your Action
Select this option.
Enter the system name.
Enter the system location.
Enter the system contact information.
Enter a string.
Your Action
Enter a name for the filter.
Copyright © 2010, Juniper Networks, Inc.