Vehicle Care; Post-Operation Care; Vehicle Cleaning And Protection - BRP CAN-AM OUTLANDER 6x6 2017 Series Operator's Manual

VEHICLE CARE

Post-Operation Care

When vehicle is used in salt-water en-
vironment (beach area, launching and
loading boats etc.), rinsing the vehi-
cle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use XPS LUBE (P/N 293
600 016) or an equivalent. This must
be performed at the end of each oper-
ating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
Vehicle Cleaning and
Protection
NOTICE
Never use a high pres-
sure washer to clean the vehicle.
USE LOW PRESSURE ONLY (like a
garden hose).
Pay attention to certain areas where
mud or debris can accumulate and po-
tentially cause wear, interferences or
promote corrosion.
Wash the vehicle with a soapy water
solution.
NOTICE
Never clean polypropy-
lene body parts with any petroleum
base cleaning products, as it will al-
ter the glossy finish.
______________
152
Non Compatible Cleaning Products
MATERIAL
TYPE
Polypropylene
vbs2012-006-002_a
DO NOT USE ON POLYPROPYLENE
Compatible Cleaning Products
MATERIAL
TYPE
Polypropylene
NON-COMPATIBLE
CLEANING
PRODUCTS
ANY PETROLEUM
BASE CLEANING
PRODUCTS
XP-S ATV
Finishing Spray
(P/N 219 701 704)
XP-S ATV Cleaning
Kit (P/N 219 701 713)
(it contains the above
XP-S ATV Finishing
Spray)
COMPATIBLE
CLEANING PRODUCT
XPS ATV Wash
(P/N 219 701 702)
Soapy water