Replacing The Drive Unit - ABB OmniCore E10 Product Manual

5.2.4 Replacing the drive unit

Location
The illustration shows the location of the drive unit in the controller.
xx2100001323
Required spare parts
Spare part
Drive unit
Harness DC-BUS
Harness EtherCAT
Harness 24_SYS
Harness Signal cable assembly
Product manual - OmniCore E10
3HAC079399-001 Revision: C
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore E10 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2019-2022 ABB. All rights reserved.
5.2.4 Replacing the drive unit
Article number Note
3HAC074966-001 DSQC3084
3HAC075385-001
3HAC075387-001
3HAC075386-001
3HAC078253-001
5 Repair
Continues on next page
135