Table of Contents
Advertisement
4.
Double-click the IP Unicast Routing object. Then double-click the OSPF object and
click the OSPF Global Parameters object.
An OSPF Global Parameters dialog box similar to the following appears:
5.
Set the OSPF Facility State option to Start or Stop.
6.
In the ASE LSA Export Interval box, enter the interval at which autonomous-system,
link-state advertisements are generated and flooded into OSPF.
Specify an integer value equal to or greater than 1. The default is 1.
7.
In the ASE LSA Export Limit box, specify how many autonomous systems will be
generated and flooded into each batch.
Specify an integer value equal to or greater than 1. The default is 100.
8.
Click OK.
Configuring OSPF Area Tables
You can configure an OSPF area table to create an OSPF area and add interfaces,
neighbors, and stub hosts to it. The method you use to configure OSPF areas depends
upon whether you are creating a new area or modifying an existing one. Separate
discussions on each task follow.
CoreWatch User's Manual
Figure 163. OSPF Global Parameters dialog box
Chapter 14: Configuring OSPF on the SSR
249
Advertisement
Table of Contents
