NEC NEAX 2000 Programming Manual page 1139

STATION TO STATION CALLING-OPERATOR ASSISTANCE
GENERAL DESCRIPTION
This service feature allows a station user to call another station within the system only with the assist-
ance of the Attendant.
STATION APPLICATION
All stations
OPERATING PROCEDURE
l. Lift handset; receive Dial Tone.
2. Dial operator access code (normally "0").
3. Relay desired station number to the Attendant.
4. The Attendant dials station number.
5. Calling and called parties are connected when the Attendant depresses RELEASE key.
SERVICE CONDITIONS
l. The Attendant may drop out of the connection either before or after the called party has answered.
2. If the called station does not answer within 30 seconds, AUTOMATIC RECALL will be activated.
3. Using this feature, the Attendant may connect the calling party to a fully restricted station.
4. STATION TO STATION CALLING - OPERATOR ASSISTANCE between tenants will not be
restricted unless such a restriction is programmed in system data.
ND-91285-001(E)
DECEMBER, 1999
(1/1)
Page 357
Revision 1.0