NEC NEAX 2000 Programming Manual page 1161

Integrated voice server, integrated multimedia exchange
Hide thumbs Also See for NEAX 2000:
Table of Contents

Advertisement

GENERAL DESCRIPTION
This feature provides any station user with the ability to conference together two outside trunk calls
and abandon the connection without dropping the TRUNK TO TRUNK CONNECTION.
STATION APPLICATION
All stations
OPERATING PROCEDURE
To establish a TRUNK TO TRUNK CONNECTION from a Single Line Telephone:
1. Depress the FLASH key (or momentarily depress the hookswitch). The original call is placed on
CONSULTATION HOLD - ALL CALLS and Special Dial Tone is received.
2. Dial the applicable trunk access code.
3. Dial the desired number and wait for the party to answer.
4. Depress the FLASH key (or momentarily depress the hookswitch). A THREE-WAY CALLING is
now in progress.
OR
Restore the handset. The original caller and the second party are now connected.
To establish a TRUNK TO TRUNK CONNECTION from a D
1. Depress the Transfer key. The original call is placed on CONSULTATION HOLD - ALL CALLS
and Special Dial Tone is received.
2. Dial the applicable trunk access code.
3. Dial the desired number and wait for the party to answer.
4. Depress the Conf key. A THREE-WAY CALLING is now in progress.
OR
Restore the handset. The original caller and second party are now connected.
To establish a TRUNK TO TRUNK CONNECTION from the Attendant Console:
1. Attendant answers an incoming call.
2. Dial the applicable trunk access code. The original party is placed on CONSULTATION HOLD -
ALL CALLS.
3. Dial the desired number.
4. Depress the RLS key. The original caller and second party are now connected.
SERVICE CONDITIONS
l. The initiating station may hang up at any time. The additional two parties will not be disconnected.
2. This feature may be restricted to individual stations in system data programming.
3. If an originating Single Line Telephone encounters a busy or no answer condition after dialing out to
conference a third party, the originating party can be reconnected to held caller by providing a hook-
flash or by depressing the FLASH key to establish a conference, and a second hookflash to release the
last party called.
TRUNK TO TRUNK CONNECTION
ND-91285-001(E)
DECEMBER, 1999
term
:
(1/2)
Page 379
Revision 1.0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neax 7400 ics m100mx

Table of Contents