NEC NEAX 2000 Programming Manual page 1178

(2/2)
SERVICE CONDITIONS
term
l . When a D is receiving a VOICE CALL, it cannot receive any other audible signal.
2. SINGLE DIGIT FEATURE ACCESS CODE must be allowed in system programming.
3. VOICE CALL service on station lines can be allowed or denied on a system basis.
4. Microphone control MIC key LED must be lit for HANDSFREE ANSWERBACK response.
5. Refer also to the DIAL INTERCOM feature.
6. VOICE CALL is available only to the My Line of the dialed station.
7. VOICE CALL will follow CALL FORWARDING - ALL CALLS and CALL FORWARDING -BUSY
LINE.
Page 396
Revision 1.0
term
VOICE CALL- D
ND-91285-001(E)
DECEMBER, 1999
(CONT'D)