Ntp-H159 Install And Remove Sfps - Cisco ONS 15310-MA SDH Procedure Manual

Required Tools and Equipment

NTP-H159 Install and Remove SFPs

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning Class 1 laser product. Statement 1008
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
Warning
beams or view directly with optical instruments. Statement 1051
For copper SFPs, the Ethernet ports of ONS 15310-MA SDH are intra-building ports and are suitable
Warning
only for connecting to cat-5 shielded (STP) cabling grounded at both ends. Statement 1084
Complete the
Step 1
Complete the
Step 2
Continue with the
Step 3
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
1-28
This procedure installs and removes SFPs. SFPs are hot-swappable
input/output devices that plug into SFP slots on the ONS 15310-MA SDH
faceplate to link the port with the fiber-optic network. SFPs are known as
pluggable port modules (PPMs) in CTC. You can preprovision the multirate
SFPs using the
task on page
SFPs appropriate to the ONS 15310-MA SDH. SFP types include STM1,
STM4, STM16, Ethernet, Gigabit Ethernet, and Fast Ethernet.
Refer to the "Card Reference" chapter in the Cisco ONS 15310-MA SDH
Reference Manual for SFP compatibility.
NTP-H151 Install the Power and Ground, page 1-12
As needed
Onsite
None
"DLP-H16 Install SFP Connectors" task on page 16-19
"DLP-H17 Remove SFP Connectors" task on page 16-21
"NTP-H160 Install Optical Cables" procedure on page
Chapter 1
"DLP-H192 Provision a Multirate Pluggable Port Module"
17-88.
Install the Cisco ONS 15310-MA SDH
as needed.
as needed.
1-29.
78-19416-01