Figure 16-17 Warning Message Window - Cisco ONS 15310-MA SDH Procedure Manual

Note
Note
In the Netscape or Mozilla Firefox web address (URL) field, enter the ONS 15310-MA SDH IP address.
Step 2
For initial setup, this is the default address, 192.1.0.2. Press Enter.
To log into CTC using an IPv6 address, you must first log into CTC using an IPv4 address and assign an
IPv6 address for the node. Then, use the IPv6 address that you assigned to the node to log into CTC. For
more information about configuring IPv6 address, see
page
Note
If a Java Plug-in Security Warning dialog box appears, complete the
Security Certificate" task on page 16-46
Software Release 4.1 and later.
After you complete the security certificate dialog box (or if the certificate is already installed), a Java
Console window displays the CTC file download status. The web browser displays information about
your Java and system environments. If this is the first login, CTC caching messages appear while CTC
files are downloaded to your computer. The first time you connect to an ONS 15310-MA SDH, this
process can take several minutes. After the download, a warning message window appears
(Figure
Figure 16-17
Click OK. The CTC Login dialog box appears
Step 3
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-44
# netscape -install
To limit Netscape to 32 colors so that if the requested color is not available, Netscape chooses
–
the closest color option, type:
netscape -ncols 32
Netscape or Internet Explorer can be used for IPv4 and Mozilla Firefox or Netscape browser
can be used for IPv6.
CTC requires a full 24-color palette to run properly. When using color-intensive applications
such as Netscape in UNIX, it is possible that UNIX might run out of colors to use for CTC.
The -install and -ncols 32 command line options limit the number of colors that Netscape
uses.
16-52. Enter the IPv6 address in the address bar of the browser, enclosed in square brackets.
If you are logging into ONS 15310-MA SDH nodes running different releases of CTC software,
log into the node running the most recent release. If you log into a node running an older release,
you will receive an INCOMPATIBLE-SW alarm for each node in the network running a new
release, and CTC will not be able to manage these nodes. To check the software version of a
node, select About CTC from the CTC Help menu. This will display the ONS 15310-MA SDH
software version for each node visible on the network view. To resolve an alarm, refer to the
Cisco ONS 15310-MA SDH Troubleshooting Guide.
16-18).
Warning Message Window
"DLP-H39 Provision IP Settings" section on
to install the public-key security certificate required by
(Figure 16-18).
Chapter 16 DLPs H1 to H99
"DLP-H30 Install Public-Key
78-19416-01