Dlp-H286Delete Snmpv3 Trap Destination - Cisco ONS 15310-MA SDH Procedure Manual

•
•
•
•
Click OK to save the information.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-H286Delete SNMPv3 Trap Destination

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, click the Provisioning > SNMP> SNMPv3 > Trap Destination tabs.
Step 2 In the Trap Destinations area, select the trap destination you want to delete.
Step 3 Click Delete. A confirmation dialog box appears.
Click Yes.
Step 4
Return to your originating procedure (NTP).
Step 5
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-84
Security Level—Select one of the following options:
noAuthNoPriv—Uses a user name match for authentication.
–
AuthNoPriv—Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms.
–
AuthPriv—Provides authentication based on the HMAC-MD5 or HMAC-SHA algorithms.
–
Provides DES 56-bit encryption based on the CBC-DES (DES-56) standard, in addition to
authentication.
Filter Profile—Select this check box and enter the filter profile name. Traps are sent only if you
provide a filter profile name and create a notification filter. This field is optional and traps can also
be sent without providing a filter profile and create a notification filter. For more information, see
"DLP-H287 Create Notification Filters" task on page
Proxy Traps Only—If selected, forwards only proxy traps from the ENE. Traps from this node are
not sent to the trap destination identified by this entry.
Proxy Tags—Specify a list of tags. The tag list is needed on a GNE only if an ENE needs to send
traps to the trap destination identified by this entry, and wants to use the GNE as the proxy.
This procedure deletes an SNMPv3 trap destination.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite
Provisioning or higher
Chapter 18
18-85.
DLPs H200 to H299
78-19416-01