Dlp-H91 Refresh Electrical Or Optical Pm Counts At One-Day Intervals; Dlp-H92 Monitor Near-End Pm Counts - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 16 DLPs H1 to H99

DLP-H91 Refresh Electrical or Optical PM Counts at One-Day Intervals

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the 15310E-CTX-K9, or electrical card. The card view appears.
Step 1
Note
Click the Performance tab.
Step 2
Click the E1, DS3, E3, or Optical tabs
Step 3
Click the 1 day radio button.
Step 4
Click Refresh. Performance monitoring appears in 1-day intervals synchronized with the time of day.
Step 5
View the Curr column to find PM counts for the current 1-day interval.
Step 6
Each monitored performance parameter has corresponding threshold values for the current time period.
If the value of the counter exceeds the threshold value for a particular 1-day interval, a TCA is raised.
The PM number represents the counter value for each performance monitoring parameter.
View the Prev-n columns to find PM counts for the previous 1-day intervals.
Step 7
If a complete count over a 1-day interval is not possible, the value appears with a yellow background.
An incomplete or incorrect count can be caused by monitoring for less than 24 hours after the counter
started, changing node timing settings, changing the time zone settings, replacing a card, resetting a card,
or changing port states. When the problem is corrected, the subsequent 1-day interval appears with a
white background.
Return to your originating procedure (NTP).
Step 8

DLP-H92 Monitor Near-End PM Counts

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
78-19416-01
This task changes the window to display PM parameters in 1-day
intervals.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
In an ONS 15310-MA SDH node, the 15310E-CTX-K9 card provides optical ports and the
E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards provide electrical ports.
This task enables you to view near-end PM counts for the selected card
and port.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-109