Dlp-H74 Change The Maximum Number Of Session Entries For Alarm History - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H74 Change the Maximum Number of Session Entries for Alarm History

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 From the Edit menu choose Preferences.
The CTC Preferences Dialog box appears
Figure 16-20
Click the up or down arrow buttons next to the Maximum History Entries field to change the entry.
Step 2
Click Apply and OK.
Step 3
Note
Note
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-92
This task changes the maximum number of session entries included in the
alarm history. Use this task to extend the history list in order to save
information for future reference or troubleshooting.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
CTC Preferences Dialog Box
Setting the Maximum History Entries value to the high end of the range uses more CTC memory
and could impair CTC performance.
This task changes the maximum history entries recorded for CTC sessions. It does not affect the
maximum number of history entries viewable for a network, node, or card.
(Figure 16-20).
Chapter 16 DLPs H1 to H99
78-19416-01