Figure 1-10 Removing The Panhead Screws - Cisco ONS 15310-MA SDH Procedure Manual

Required Tools and Equipment
Figure 1-10
Step 2 Using the 1/4-inch nut driver, install the six hexagonal standoffs onto the mounting holes that held the
six panhead screws.
Align the holes on the rear cover with the hexagonal standoffs
Step 3
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
1-38
Removing the Panhead Screws
Chapter 1 Install the Cisco ONS 15310-MA SDH
(Figure 1-11).
78-19416-01