Dlp-H239 Change Optical Port Sdh Thresholds Settings - Cisco ONS 15310-MA SDH Procedure Manual

Table 18-11
Parameter
Type
ALS Mode
Click Apply.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-H239 Change Optical Port SDH Thresholds Settings

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click the 15310E-CTX-K9 card.
Step 1
Click the Provisioning > Optical > SDH Thresholds tabs.
Step 2
Note
Modify the settings described in
Step 3
fields, you can choose an option from a drop-down list; in others you can type a value.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-46
Optical Port Line Settings (continued)
Description
Defines the port as SDH or SDH
(15310-MA SDH only).
Allows you to provision automatic
laser shutdown
This task changes SDH thresholds settings for ONS 15310-MA SDH
optical ports.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
If you want to modify a threshold setting, it might be necessary to click the available directional,
type, and interval (15 Min, 1 Day) radio buttons and then click Refresh. This will display the
desired threshold setting.
Table 18-12
Options
SDH
•
SDH
•
Disable: ALS is off; the laser is not
•
automatically shut down when traffic
outages (LOS) occur.
Auto Restart: ALS is on; the laser
•
automatically shuts down when traffic
outages (LOS) occur. It automatically
restarts when the conditions that caused the
outage are resolved.
Manual Restart: ALS is on; the laser
•
automatically shuts down when traffic
outages (LOS) occur. However, the laser
must be manually restarted when conditions
that caused the outage are resolved.
• Manual Restart for Test: Manually restarts
the laser for testing.
by clicking in the field that you want to modify. In some
Chapter 18 DLPs H200 to H299
78-19416-01