Cisco ONS 15310-MA SDH Procedure Manual page 599

Appendix A CTC Information and Shortcuts
Table A-2 CTC Menu and Toolbar Options (continued)
Menu Menu Option
Tools Circuits
78-19416-01
Toolbar Description
— Displays the following options:
Repair Circuits—(Cisco ONS 15454 only) Repairs incomplete circuits
•
following replacement of the ONS 15454 alarm interface panel (AIP). Refer
to the Cisco ONS 15454 Troubleshooting Guide for more information.
Reconfigure Circuits—Allows you to reconfigure circuits. Refer to the
•
"NTP-H76 Reconfigure Circuits" procedure on page
• Set Path Selector Attributes—Allows you to edit path protection circuit path
selector attributes. See the
Selectors" task on page
Set Circuit State—Allows you to change a circuit service state. See the
•
"DLP-H111 Change a Circuit Service State" task on page
Roll Circuit—Allows you to reroute live traffic without interrupting service.
•
See the "NTP-H129 Bridge and Roll Traffic" procedure on page
Delete Rolls—Allows you to delete roll circuits. See the
•
and Roll Traffic" procedure on page
Upgrade OCHNC—(ONS 15454 only) Upgrades OCHNCs created in
•
earlier software releases to OCHCCs. Refer to the Cisco ONS 15454 DWDM
Procedure Guide for more information.
Show RPR Circuit Ring—(ONS 15454 only) Shows the RPR ring for the
•
circuit selected on the Circuits window. Refer to the Cisco ONS 15454
Procedure Guide.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
"DLP-H114 Edit Path Protection Circuit Path
17-18.
6-10.
Manage the CTC Window
6-11.
17-15.
6-10.
"NTP-H129 Bridge
A-5