Dlp-H128 Disable Open Shortest Path First Protocol; Dlp-H129 Delete A Proxy Tunnel - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
Click Yes.
Step 4
Return to your originating procedure (NTP).
Step 5

DLP-H128 Disable Open Shortest Path First Protocol

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Network > OSPF tabs. The OSPF subtab has several options.
Step 1
In the OSPF on LAN area, uncheck the OSPF active on LAN check box.
Step 2
Click Apply.
Step 3
Note
Return to your originating procedure (NTP).
Step 4

DLP-H129 Delete a Proxy Tunnel

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Click the Provisioning > Network > Proxy subtabs.
Click the proxy tunnel that you want to delete.
Step 2
Click Delete.
Step 3
Continue with your originating procedure (NTP).
Step 4
78-19416-01
This task disables the Open Shortest Path First (OSPF) routing protocol for
an ONS 15310-MA SDH local area network (LAN).
None
DLP-H29 Log into CTC, page 16-43
DLP-H41 Set Up or Change Open Shortest Path First Protocol, page 16-56
As needed
Onsite or remote
Provisioning or higher
Disabling OSPF can cause an 15310E-CTX-K9 reboot, which causes a temporary loss of
connectivity to the node but does not affect traffic.
This task removes a proxy tunnel.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-35