Figure 8-1 Ons 15310-Ma Sdh Node View Conditions Window - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin
Figure 8-1
To delete cleared card-level alarms:
Step 3
In node view, double-click the card graphic for the card you want to open.
a.
Click the Alarms tab and then click Delete Cleared Alarms, referring to the following rules:
b.
•
•
To delete cleared network-level alarms:
Step 4
From the View menu choose Go to Network View.
a.
Click the Alarms tab and then click Delete Cleared Alarms, referring to the following rules:
b.
•
•
To remove the transient messages from the History window, click Delete Cleared Alarms.Transient
Step 5
messages are single messages, not raise-and-clear pairs (that is, they do not have companion messages
stating they are cleared).
Stop. You have completed this procedure.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
8-4
ONS 15310-MA SDH Node View Conditions Window
If the Autodelete Cleared Alarms check box is checked, an alarm disappears from the window
when it is cleared.
If the Autodelete Cleared Alarms check box is not checked, an alarm remains in the window
when it is cleared. The alarm appears white in the window and has a Clear (C) severity. The
alarm can be removed by clicking the Delete Cleared Alarms button.
If the Autodelete Cleared Alarms check box is checked, an alarm disappears from the window
when it is cleared.
If the Autodelete Cleared Alarms check box is not checked, an alarm remains in the window
when it is cleared. The alarm appears white in the window and has a Clear (CL) severity. The
alarm can be removed by clicking the Delete Cleared Alarms button.
Chapter 8 Manage Alarms
78-19416-01