Dlp-H16 Install Sfp Connectors - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Chapter 16
DLPs H1 to H99
You must provide some type of strain-relief for the ONS 15310-MA SDH cabling.
Caution
Route the cables to the right side of the shelf assembly according to local site practice, avoiding blocking
Step 2
the front of the expansion card.
Secure the cables to the strain-relief device using tie-wraps or other site-specific methods.
Step 3
Label all cables at each end of the connection to avoid confusion with cables that are similar in
Step 4
appearance.
Return to your originating procedure (NTP).
Step 5

DLP-H16 Install SFP Connectors

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Warning
Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
Class 1 laser product. Statement 1008
Warning
SFPs are hot-swappable and can therefore be installed and removed while the card/shelf assembly is
Note
powered and running.
SFPs are generically called pluggable port modules (PPMs) in CTC. After installing the SFP, multirate
Note
PPMs must be provisioned in CTC. See the
Verify that the SFP is correct for your network. Refer to the "Card Reference" chapter in the
Step 1
Cisco ONS 15310-MA SDH Reference Manual for card compatibility and SFP information.
Remove the SFP from its protective packaging.
Step 2
Orient the SFP so that the Cisco serial number label is facing away from the shelf (to the right).
Step 3
78-19416-01
This task installs CE-MR-6, STM1, STM4, STM16, or
STM1/STM4/STM16 (multirate) Small Form-factor Pluggables (SFPs).
SFPs are hot-swappable input/output devices that plug into SFP slots on the
ONS 15310-MA SDH faceplate to link the port to the fiber-optic network.
SFPs compatible with the ONS 15310-MA SDH
NTP-H150 Install the Shelf Assembly, page 1-5
NTP-H151 Install the Power and Ground, page 1-12
As needed
Onsite
None
NTP-H130 Manage Pluggable Port Modules, page
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
9-3.
16-19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents