Table 18-11 Optical Port Line Settings - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Table 18-11
Parameter
Admin State
Service State
SF BER
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-44
Optical Port Line Settings (continued)
Description
Sets the port service state unless
network conditions prevent the
change.
Identifies the autonomously
generated state that gives the
overall condition of the port.
Service states appear in the format:
Primary State-Primary State
Qualifier, Secondary State.
Sets the signal fail bit error rate.
Chapter 18
Options
unlocked—Puts the port in-service. The
port service state changes to
unlocked-enabled.
Automatic In Service—Puts the port in
automatic in-service. The port service state
changes to
unlocked-disabled,automaticInService.
locked, outOfGroup—Removes the port
from service and disables it. The port
service state changes to
locked-enabled,disabled.
locked, maintenance—Removes the port
from service for maintenance. The port
service state changes to
locked-enabled,maintenance.
CTC will not allow you to change a port
Note
service state from unlocked-enabled to
locked-enabled,disabled. You must first
change a port to the
locked-enabled,maintenance service
state before putting it in the
locked-enabled,disabled service state.
unlocked-enabled—The port is fully
operational and performing as provisioned.
unlocked-disabled,automaticInService—The
port is out-of-service, but traffic is carried.
Alarm reporting is suppressed. The ONS
node monitors the ports for an error-free
signal. After an error-free signal is detected,
the port stays in
unlocked-disabled,automaticInService state
for the duration of the soak period. After the
soak period ends, the port service state
changes to unlocked-enabled.
locked-enabled,disabled—The port is
out-of-service and unable to carry traffic.
locked-enabled,maintenance—The port is
out-of-service for maintenance. Alarm
reporting is suppressed, but traffic is carried
and loopbacks are allowed.
1E-3
1E-4 (default)
1E-5
DLPs H200 to H299
78-19416-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents