Dlp-H241 Edit Path Protection Dual-Ring Interconnect Circuit Hold-Off Timer; Dlp-H242 Create A 1+1 Protection Group For The Ons 15310-Ma Sdh - Cisco ONS 15310-MA SDH Procedure Manual

DLP-H241 Edit Path Protection Dual-Ring Interconnect Circuit Hold-Off Timer

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco recommends that you set the DRI port HOT value to zero and the circuit path selector HOT value
Note
to a number equal to or greater than zero.
From the View menu, choose Go to Network View.
Step 1
Click the Circuits tab.
Step 2
Click the path protection circuit you want to edit, then click Edit.
Step 3
In the Edit Circuit window, click the Path Protection Selectors tab.
Step 4
Create a hold-off time for the circuit source and destination ports:
Step 5
a.
b.
Click Apply, then close the Edit Circuit window by choosing Close from the File menu.
Step 6
Return to your originating procedure (NTP).
Step 7

DLP-H242 Create a 1+1 Protection Group for the ONS 15310-MA SDH

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-48
This task changes the amount of time a path selector switch is delayed for
circuits routed on a path protection dual-ring interconnect (DRI) topology.
Setting a switch hold-off time (HOT) prevents unnecessary back and forth
switching when a circuit is routed through multiple path protection
selectors.
None
NTP-H31 Provision Path Protection Nodes, page 4-9
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
In the Holder Off Timer area, double-click the cell of the circuit source port (top row), then type the
new hold-off time. The range is 0 to 10,000 ms in increments of 100.
In the Hold-Off Timer area, double-click the cell of the circuit destination port (bottom row), then
type the hold-off time entered in Step
This task creates a 1+1 protection group for ONS 15310-MA SDH optical
ports.
None
NTP-H130 Manage Pluggable Port Modules, page 9-3
As needed
Onsite or remote
Provisioning or higher
a.
Chapter 18 DLPs H200 to H299
(optional)
78-19416-01