Cisco ONS 15310-MA SDH Procedure Manual page 39

Preface
6.
The information in the book follows a task oriented hierarchy using the elements described below.
Chapter (Director Level)
The guide is divided into logical work groups (chapters) that serve as director entry into the procedures.
You may proceed sequentially (recommended), or locate the work you want to perform from the list of
procedures on the first page of every chapter (or turn to the front matter or index). The chapters are:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Non-Trouble Procedure (NTP)
Each NTP (procedure) is a list of steps designed to accomplish a specific procedure. Follow the steps
until the procedure is complete. If you need more detailed instructions, refer to the Detailed Level
Procedure (DLP) specified in the procedure steps.
Note Throughout this guide, NTPs are referred to as "procedures" and DLPs are termed "tasks." Every
reference to a procedure includes its NTP number, and every reference to a task includes its DLP
number.
78-19416-01
List of Tasks
Install the Cisco ONS 15310-MA SDH
Connect the PC and Log into the GUI
Turn Up a Node
Turn Up a Network
Create Circuits and VC Low-order Path Tunnels
Monitor Performance
Manage Alarms
Change Port Settings
Change Node Settings
Upgrade Cards and Spans
Convert Network Configurations
Add and Remove Nodes
Maintain the Node
Power Down the Node
DLPs H1 to H99
DLPs H100 to H199
DLPs H200 to H299
CTC Information and Shortcuts
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
xxxix