Dlp-H36 Configure The Ctc Alerts Dialog For Automatic Popup; Dlp-H37 Create A New User On A Single Node - Cisco ONS 15310-MA SDH Procedure Manual

Return to your originating procedure (NTP).
Step 9

DLP-H36 Configure the CTC Alerts Dialog for Automatic Popup

Purpose
Tools
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Click the CTC Alerts toolbar icon.
Step 2 In the CTC Alerts dialog box, choose one of the following:
•
•
•
Click Close.
Step 3
Return to your originating procedure (NTP).
Step 4

DLP-H37 Create a New User on a Single Node

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, click the Provisioning > Security > Users tabs.
Step 1
Step 2 In the Security window, click Create.
Step 3 In the Create User dialog box, enter the following:
•
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-50
This task sets up the CTC Alerts dialog box to open for all alerts, circuit
deletion errors only, or never. The CTC Alerts dialog box displays network
disconnection, Send-PDIP inconsistency, circuit deletion status, condition
retrieval errors, and software download failure.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
All alerts—Sets the CTC Alerts dialog box to open automatically for all notifications.
Error alerts only—Sets the CTC Alerts dialog box to open automatically for circuit deletion errors
only.
Never—Sets the CTC Alerts dialog box to never open automatically.
This task creates a new user for one ONS 15310-MA SDH.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
Name—Type the user name. The name must have a minimum of six and a maximum of
20 alphanumeric characters (a-z, A-Z, 0-9). For TL1 compatibility, the user name must have
6 to 10 characters.
Chapter 16 DLPs H1 to H99
78-19416-01