Cisco ONS 15310-MA SDH Procedure Manual page 329

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Chapter 16
DLPs H1 to H99
Click the IP Address tab.
f.
In the IP Address window, click Specify an IP address.
g.
In the IP Address field, enter any legitimate IP address other than the node IP address. The default
h.
node IP address is 192.1.0.2.
In the Subnet Mask field, type the same subnet mask as the ONS 15310-MA SDH. The default is
i.
255.255.255.0 (24 bit).
j.
Click OK.
In the TCP/IP dialog box, click the Gateway tab.
k.
In the New Gateway field, type the address entered in Step g. Click Add.
l.
Verify that the IP address appears in the Installed Gateways field, then click OK.
m.
When the prompt to restart your PC appears, click Yes.
n.
If you have Windows NT 4.0 installed on your PC, complete the following steps to change its TCP/IP
Step 4
configuration:
From the Windows Start menu, choose Settings > Control Panel.
a.
In the Control Panel dialog box, click the Network icon.
b.
In the Network dialog box, click the Protocols tab, choose TCP/IP Protocol, then click Properties.
c.
Click the IP Address tab.
d.
In the IP Address window, click Specify an IP address.
e.
In the IP Address field, enter any legitimate IP address other than the node IP address. The default
f.
node IP address is 192.1.0.2.
In the Subnet Mask field, type the same subnet mask as the ONS 15310-MA SDH. The default is
g.
255.255.255.0 (24 bit).
Click Advanced.
h.
In the Gateways List, click Add. The TCP/IP Gateway Address dialog box appears.
i.
Type the IP address entered in Step
j.
Click Add.
k.
Click OK.
l.
m.
Click Apply.
n.
Reboot your PC.
Step 5
If you have Windows 2000 installed on your PC, complete the following steps to change its TCP/IP
configuration:
a.
From the Windows Start menu, choose Settings > Network and Dial-up Connections >
Local Area Connection.
In the Local Area Connection Status dialog box, click Properties.
b.
On the General tab, choose Internet Protocol (TCP/IP), then click Properties.
c.
d.
Click Use the following IP address.
e.
In the IP Address field, enter any legitimate IP address other than the current node IP address. The
default node IP address is 192.1.0.2.
In the Subnet Mask field, type the same subnet mask as the ONS 15310-MA SDH. The default is
f.
255.255.255.0 (24 bit).
78-19416-01
f
in the Gateway Address field.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents