Dlp-H155 Delete A Line Dcc Termination; Dlp-H156 Delete A Provisionable Patchcord - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
Click the RS-DCC termination that you want to delete and click Delete. The Delete RS-DCC
Step 2
Termination dialog box appears.
Step 3 Click Yes in the confirmation dialog box.
Return to your originating procedure (NTP).
Step 4

DLP-H155 Delete a Line DCC Termination

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Deleting a DCC termination can cause you to lose visibility of nodes that do not have other DCCs or
Caution
network connections to the CTC computer.
In node view, click the Provisioning > Comm Channels > MS-DCC tabs.
Step 1
Click the MS-DCC termination that you want to delete and click Delete. The Delete MS-DCC
Step 2
Termination dialog box appears.
Click Yes in the confirmation dialog box.
Step 3
Return to your originating procedure (NTP).
Step 4

DLP-H156 Delete a Provisionable Patchcord

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Deleting the last DCC termination on an optical port automatically deletes all provisionable patchcords
Note
provisioned on the port. If the port is in a 1+1 protection group, CTC automatically deletes the patchcord
link on the protection port.
78-19416-01
This task deletes a SDH Line DCC termination on the ONS 15310-MA
SDH.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning or higher
This task deletes a provisionable patchcord.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Provisioning and higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-55