Ntp-H137 Edit Network Element Defaults - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin
Table 14-2 ONS 15310-MA SDH Timing Report (continued)
Item Description
SSM Indicates the
Quality SSM timing
quality.
SSM Indicates the
Changed date and time of
the last SSM
status change in
MM/DD/YY
HH:MM:SS
format.
Stop. You have completed this procedure.

NTP-H137 Edit Network Element Defaults

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Note For a list of card and node default settings, refer to the "Network Element Defaults" appendix in the
Cisco ONS 15310-MA SDH Reference Manual. To change card settings individually (that is, without
changing the defaults), see
"Change Node Settings."
Complete the
Step 1
defaults.
Click the Provisioning > Defaults tabs.
Step 2
Under Defaults Selector, choose a card type (if editing card-level defaults), CTC (if editing CTC
Step 3
defaults), or NODE (if editing node-level defaults). Clicking on the node name (at the top of the Defaults
Selector column) lists all available NE defaults in the Default Name column. To selectively display the
defaults for a given card type from a node-level or CTC-level, you can drill down the Defaults Selector
tree structure.
Step 4 Locate a default that you want to change under Default Name.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
14-18
Options
Eight to ten SSM quality
messages can appear.
—
This procedure explains how to edit factory-configured NE defaults using
the NE Defaults editor. The new defaults can be applied only to the node
on which they are edited. They can also be exported to a file and imported
for use on other nodes.
None
As needed
Onsite or remote
Superuser
Chapter 9, "Change Port Settings."
"DLP-H29 Log into CTC" task on page 16-43
Option Descriptions
For a list of SSM message sets, refer to the "Timing"
chapter in the Cisco ONS 15310-MA SDH Reference
Manual.
—
To change node settings, see
at the node where you want to edit NE
Chapter 14 Maintain the Node
Chapter 10,
78-19416-01