Chapter 12 Convert Network Configurations; Before You Begin - Cisco ONS 15310-MA SDH Procedure Manual

Convert Network Configurations
This chapter explains how to convert from one SDH topology to another in a Cisco ONS 15310-MA
SDH network. For initial network turn up, see

Before You Begin

This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
78-19416-01
NTP-H136 Convert a Point-to-Point to a Linear ADM Automatically, page
needed.
NTP-H93 Convert a Point-to-Point to a Linear ADM Manually, page
the in-service topology upgrade wizard is not available or you need to back out of the wizard.
NTP-H96 Convert an Unprotected Point-to-Point or Linear ADM to a Path Protection Configuration
Automatically, page 12-5—Complete as needed.
NTP-H95 Convert a Point-to-Point or Linear ADM to a Path Protection Manually,
page 12-6—Complete as needed if the in-service topology upgrade wizard is not available or you
need to back out of the wizard.
C H A P T E R
Chapter 4, "Turn Up a Network."
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
12
12-2—Complete as
12-4—Complete as needed if
12-1