Ntp-H78 Change Node Management Information; Ntp-H79 Change Ctc Network Access - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin

NTP-H78 Change Node Management Information

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
Step 2.
Complete the
Step 2
As needed, complete the
Step 3
task on page
As needed, complete the
Step 4
After confirming the changes, complete the
Step 5
Stop. You have completed this procedure.

NTP-H79 Change CTC Network Access

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Additional ONS 15310-MA SDH networking information and procedures, including IP addressing
Note
examples, static route scenarios, Open Shortest Path First (OSPF) protocol, routing information protocol
options, and Open System Interconnection (OSI) information, are provided in the "Management
Network Connectivity" chapter of the Cisco ONS 15310-MA SDH Reference Manual.
Step 1 Complete the
Step 2.
Step 2 Complete the
Step 3 Perform any of the following tasks as needed:
•
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
10-2
This procedure changes basic information about the node such as node
name, date, time, contact information, and the login legal disclaimer.
None
NTP-H20 Set Up Name, Date, Time, and Contact Information, page 3-3
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page
"NTP-H102 Back Up the Database" procedure on page
"DLP-H123 Change the Node Name, Date, Time, and Contact Information"
17-31.
"DLP-H124 Change the Login Legal Disclaimer" task on page
This procedure changes essential network information, including IP
settings, static routes, and OSPF options.
None
NTP-H21 Set Up CTC Network Access, page 3-6
As needed
Onsite or remote
Provisioning or higher
"DLP-H29 Log into CTC" task on page
"NTP-H102 Back Up the Database" procedure on page
DLP-H125 Change IP Settings, page 17-33
16-43. If you are already logged in, continue with
"NTP-H102 Back Up the Database" procedure on page
16-43. If you are already logged in, continue with
Chapter 10 Change Node Settings
14-2.
17-32.
14-2.
78-19416-01
14-2.