Cisco ONS 15310-MA SDH Procedure Manual page 469

Chapter 17 DLPs H100 to H199
Insert the system software CD into the computer CD-ROM drive. If the CTC Installation Wizard appears,
Step 1
click Cancel.
To find the recovery tool file, go to the CISCO15310 directory on the CD (usually
Step 2
/cdrom/cdrom0/CISCO15310).
If you are using a file explorer, double-click the RE-INIT.jar file. If you are working with a command
Step 3
line, run java -jar RE-INIT.jar. The NE Re-Initialization window appears
Step 4 Complete the following fields:
GNE IP—If the node you are reinitializing is accessed through another node configured as a GNE,
•
enter the GNE IP address. If you have a direct connection to the node, leave this field blank.
• Node IP—Enter the node name or IP address of the node that you are reinitializing.
• User ID—Enter the user ID needed to access the node.
Password—Enter the password for the user ID.
•
Upload Package—Check this box to send the software package file to the node. If unchecked, the
•
software stored on the node is not modified.
• Force Upload—Check this box to send the software package file to the node even if the node is
running the same software version. If unchecked, reinitialization will not send the software package
if the node is already running the same version.
Activate/Revert—Check this box to activate the uploaded software (if the software is a later than the
•
installed version) or revert to the uploaded software (if the software is earlier than the installed
version) as soon as the software file is uploaded. If unchecked, the software is not activated or
reverted after the upload, allowing you to initiate the functions later from the node view
Maintenance > Software tab.
Confirm—Check this box if you want a warning message displayed before any operation is
•
performed. If unchecked, reinitialization does not display a warning message.
• Database restore—Check this box if you want to send a new database to the node and to restore node
provision values. (This is equivalent to the CTC database restore with the "Complete Database"
check box unchecked.)
Complete database restore—Check this option to send a new database to the node and to restore
•
node provision and system values. (This is equivalent to the CTC database restore with the
"Complete Database" check box checked.)
No database restore—Check this box if you do not want the node database to be modified.
•
Search Path—Enter the path to the CISCO15310 folder on the CD drive.
•
Click Go.
Step 5
Before continuing with the next step, verify that the database to upload is correct. You cannot reverse
Caution
the upload process after you click Yes.
Review the information on the Confirm NE Re-Initialization dialog box, then click Yes to start the
Step 6
reinitialization.
The reinitialization begins. After the software is downloaded and activated and the database is uploaded
to the 15310E-CTX-K9 card, "Complete" appears in the status bar and the 15310E-CTX-K9 card will
reboot. Wait a few minutes for the reboot to complete.
After the reboot is complete, log into the node using
Step 7
78-19416-01
DLP-H29 Log into CTC, page
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
(Figure 17-2 on page 17-61).
16-43.
17-63