Dlp-H181 Install The Lan Cable For Ctc Interface - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
Click Apply.
Step 7
To close the Edit Circuit window, choose Close from the File menu.
Step 8
Return to your originating procedure (NTP).
Step 9

DLP-H181 Install the LAN Cable for CTC Interface

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Plug one end of the LAN cable into the LAN port on the front of the ONS 15310-MA SDH.
Step 1
Connect the other end to the PC you want to use to access CTC.
Step 2
Table 17-8
Table 17-8
RJ-45 Pin Number
1
2
3
4
5
6
7
8
Return to your originating procedure (NTP).
Step 3
78-19416-01
This task installs the LAN cable to provide a 10/100 Mbps Ethernet
interface for CTC/TL1 provisioning.
CAT-5 RJ-45 cable
NTP-H150 Install the Shelf Assembly, page 1-5
As needed
Onsite
None
shows the LAN cable pin assignments.
LAN Cable Pin Assignments
Function
TX +
TX –
RX +
NC
NC
RX –
NC
NC
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-71