Ntp-H168 Install The Front Door - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 1 Install the Cisco ONS 15310-MA SDH

NTP-H168 Install the Front Door

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Caution Be careful not to crimp any fiber-optic cables that are connected to the optical cards. Some might not
have the fiber boot attached.
Always use the supplied ESD wristband when working with a powered ONS 15310-MA SDH. For
Caution
detailed instructions on how to wear the ESD wristband, refer to the
(ESD) and Grounding
Place the door hinge flush against the inside of the ONS 15310-MA SDH chassis flange on the left
Step 1
(Figure
78-19416-01
This procedure replaces the front door and door ground strap after
installing cards and fiber-optic cables.
Front-door kit (53-2617-XX)
Door hinge
•
Door striker
•
4-40 screws (8)
•
Ground cable
•
Hex nuts (2)
•
NTP-H150 Install the Shelf Assembly, page 1-5
Required
Onsite
None
Guide.
1-9).
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Required Tools and Equipment
Cisco ONS Electrostatic Discharge
1-35