Cisco ONS 15310-MA SDH Procedure Manual page 5

Turn Up a Network
4
C H A P T E R
Create Circuits and VC Low-order Path Tunnels
5
C H A P T E R
78-19416-01
NTP- H181 Provision Node to Send SNMPv3 Traps
NTP- H182 Manually Provision a GNE/ENE to Manage an ENE using SNMPv3
NTP- H183 Automatically Provision a GNE to Manage an ENE using SNMPv3
NTP- H184 Manually Provision a GNE/ENE to Send SNMPv3 Traps from an ENE using SNMPv3
NTP- H185 Automatically Provision a GNE/ENE to Send SNMPv3 Traps from an ENE Using
SNMPv3
3-18
4-1
Before You Begin
4-1
NTP- H26 Verify Node Turn-Up
NTP- H27 Provision a Point-to-Point Network
NTP- H28 Point-to-Point Network Acceptance Test
NTP- H29 Provision a Linear ADM Network
NTP- H30 Linear ADM Network Acceptance Test
NTP- H31 Provision Path Protection Nodes
NTP- H32 Path Protection Acceptance Test
NTP- H33 Provision an Open-Ended Path Protection Configuration
NTP- H34 Open-Ended Path Protection Acceptance Test
NTP- H146 Provision a Traditional Path Protection Dual-Ring Interconnect on the ONS 15310-MA
SDH
4-18
NTP- H147 Provision an Integrated Path Protection Dual-Ring Interconnect on the ONS 15310-MA
SDH
4-20
NTP- H35 Create a Logical Network Map
Before You Begin
5-1
NTP- H36 Verify Network Turn-Up
NTP- H37 Create an Automatically Routed E1 Circuit
NTP- H38 Create a Manually Routed E1 Circuit
NTP- H39 Create a Unidirectional E1 Circuit with Multiple Drops
NTP- H40 Create an Automatically Routed DS-3 or E3 Circuit
NTP- H41 Create a Manually Routed DS-3 or E3 Circuit
NTP- H42 Create a Unidirectional DS-3 or E3 Circuit with Multiple Drops
NTP- H46 Test Electrical Circuits
NTP- H43 Create an Automatically Routed VC Low-order Path Tunnel
NTP- H44 Create a Manually Routed VC Low-order Path Tunnel
3-15
4-2
4-3
4-4
4-6
4-7
4-9
4-11
4-22
5-1
5-4
5-5
5-9
5-24
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
3-15
3-16
4-13
4-15
5-12
5-15
5-18
5-21
5-25
5-28
Contents
3-17
v