Ntp-A3 Open And Remove The Front Door, Page - Cisco ONS 15454 Install

NTP- A3 Open and Remove the Front Door
The 10-Gbps-compatible shelf assembly (15454-SA-HD) and fan-tray assembly (15454-FTA3) are
Note
required with the ONS 15454 XC10G, OC-192, and OC-48 any slot (AS) cards.
The ONS 15454 installations are suitable for Network Telecommunication facilities and locations where
Note
NEC are applicable.
Complete the
Step 1
page 17-2
Step 2 To install the air filter on the bottom of the shelf rather than below the fan-tray assembly, complete the
"DLP-A4 Install the External Brackets and Air Filter" task on page
Step 3 Complete the necessary rack mount task:
•
•
•
Continue with the
Step 4
Stop. You have completed this procedure.
NTP-A3 Open and Remove the Front Door
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
Step 2 As needed, complete the
Continue with the
Step 3
Stop. You have completed this procedure.
Cisco ONS 15454 Procedure Guide, Release 8.5.1
1-6
"DLP-A3 Reverse the Mounting Bracket to Fit a 19-inch (482.6 mm) Rack" task on
if you need to convert from a 23-inch (584.2 mm) to a 19-inch (482.6 mm) rack.
DLP-A5 Mount the Shelf Assembly in a Rack (One Person), page 17-5
DLP-A6 Mount the Shelf Assembly in a Rack (Two People), page 17-6
DLP-A7 Mount Multiple Shelf Assemblies in a Rack, page 17-7
"NTP-A3 Open and Remove the Front Door" procedure on page
This procedure opens and removes the front door to access the equipment.
Open-end wrench
Pinned hex key
NTP-A2 Install the Shelf Assembly, page 1-5
Required
Onsite
None
"DLP-A8 Open the Front Door" task on page
"DLP-A9 Remove the Front Door" task on page
"NTP-A4 Remove the Backplane Covers" procedure on page
Chapter 1 Install the Shelf and Backplane Cable
17-4.
1-6.
17-8.
17-9.
1-7.
78-18537-01