Table 18-3 Line Options For E1 Ports - Cisco ONS 15310-MA SDH Procedure Manual

Hide thumbs Also See for ONS 15310-MA SDH:
Table of Contents

Advertisement

Table 18-3
Parameter
Admin State
Service State
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-34
Line Options for E1 Ports (continued)
Description
Sets the port service state
unless network conditions
prevent the change.
Identifies the autonomously
generated state that gives the
overall condition of the port.
Service states appear in the
format: Primary
State-Primary State
Qualifier, Secondary State.
Options
unlocked—(In Service) Puts the port in service.
The port service state changes to In Service and
Normal (unlocked-enabled).
Automatic In Service—(In Service and
Automatic In-Service) Puts the port in
automatic in-service. The port service state
changes to Out-of-Service and Autonomous,
Automatic In-Service
(unlocked-disabled,automaticInService).
locked, outOfGroup—(Out-of-Service and
Disabled) Removes the port from service and
disables it. The port service state changes to
Out-of-Service and Management, Disabled
(locked-enabled,disabled).
locked, maintenance—(Out-of-Service and
Maintenance) Removes the port from service
for maintenance. The port service state changes
to Out-of-Service and Management,
Maintenance (locked-enabled,maintenance).
Note
CTC will not allow you to change a port
service state from unlocked-enabled to
locked-enabled,disabled. You must first
change a port to the
locked-enabled,maintenance service state
before putting it in the
locked-enabled,disabled service state.
unlocked-enabled—The port is fully
operational and performing as provisioned.
unlocked-disabled,automaticInService—The
port is out-of-service, but traffic is carried.
Alarm reporting is suppressed. The ONS node
monitors the ports for an error-free signal.
After an error-free signal is detected, the port
stays in unlocked-disabled,automaticInService
state for the duration of the soak period. After
the soak period ends, the port service state
changes to unlocked-enabled.
locked-enabled,disabled—The port is
out-of-service and unable to carry traffic.
locked-enabled,maintenance—The port is
out-of-service for maintenance. Alarm
reporting is suppressed, but traffic is carried
and loopbacks are allowed.
Chapter 18
DLPs H200 to H299
78-19416-01

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents