Cisco ONS 15310-MA SDH Procedure Manual page 27

Figures
Convert Network Configurations
12-1
NTP-H136 Convert a Point-to-Point to a Linear ADM Automatically
12-2
NTP-H93 Convert a Point-to-Point to a Linear ADM Manually
12-4
NTP-H96 Convert an Unprotected Point-to-Point or Linear ADM to a Path Protection Configuration
Automatically
12-5
NTP-H95 Convert a Point-to-Point or Linear ADM to a Path Protection Manually
12-6
Add and Remove Nodes
13-1
NTP-H97 Add a Path Protection Node
13-1
NTP-H98 Remove a Path Protection Node
13-4
NTP-H99 Add an End Node to a Linear ADM
13-6
NTP-H135 Add a Non-ONS 15310-MA Node to a Linear ADM
13-7
NTP-H101 Remove an In-Service Node from a Linear ADM
13-9
Maintain the Node
14-1
NTP-H102 Back Up the Database
14-2
NTP-H103 Restore the Database
14-3
NTP-H132 View and Manage OSI Information
14-4
NTP-H104 Restore the Node to Factory Configuration
14-5
NTP-H105 View the Audit Trail Records
14-6
NTP-H106 Offload the Audit Trail Record
14-8
NTP-H107 Off-Load the Diagnostics File
14-9
NTP-H108 Initiate or Clear an External Switching Command
14-10
NTP-H109 Clean Fiber Connectors
14-11
NTP-H145 Replace the Fan-Tray Assembly
14-12
NTP-H134 Reset Cards Using CTC
14-13
NTP-H114 View the Loopback Status on a Port
14-14
NTP-H115 Switch the Node Timing Reference
14-15
NTP-H116 View the Timing Report
14-15
NTP-H137 Edit Network Element Defaults
14-18
NTP-H138 Import Network Element Defaults
14-19
NTP-H139 Export Network Element Defaults
14-21
Power Down the Node
15-1
NTP-H120 Power Down the ONS 15310-MA SDH
15-1
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
xxvii
78-19416-01