Table 18-9 Electrical Path Threshold Options For Ds-3 Ports; Table 18-10 Sdh Thresholds Options For Ds-3 Ports - Cisco ONS 15310-MA SDH Procedure Manual

Table 18-9
Parameter
Port
CV
ES
SAS
SES
UAS
AISS
Table 18-10
Table 18-10
Parameter
Port
CV
ES
FC
SES
UAS
Note
Return to your originating procedure (NTP).
Step 7
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-42
Electrical Path Threshold Options for DS-3 Ports
Description
(Display only) Port number.
• 1 to 3
Coding violations. Available for Near End (DS3 Pbit and DS3CPbit); and Far End (DS3
CPbit only).
Errored seconds. Available for Near End (DS3 Pbit and DS3CPbit); and Far End (DS3
CPbit only).
Severely errored seconds. Available for Near End, DS3 Pbit only.
Severely errored seconds. Available for Near End (DS3 Pbit and DS3CPbit); and Far End
(DS3 CPbit only).
Unavailable seconds. Available for Near End (DS3 Pbit and DS3CPbit); and Far End
(DS3CPbit only).
Alarm indication signal seconds. Available for Near End, DS3 Pbit only.
describes the values on the Provisioning > SDH Thresholds tab for the DS-3 ports.
SDH Thresholds Options for DS-3 Ports
Description
Port number
• 1 to 3
Coding violations. Available for Near End and Far End.
Errored seconds. Available for Near End and Far End.
Failure count. Available for Near End and Far End.
Severely errored seconds. Available for Near End and Far End.
Unavailable seconds. Available for Near End and Far End.
The threshold value displays after the circuit is created.
Chapter 18 DLPs H200 to H299
78-19416-01