Ntp-H69 Locate And View Circuits; Ntp-H70 View Cross-Connect Resource Usage - Cisco ONS 15310-MA SDH Procedure Manual

Before You Begin

NTP-H69 Locate and View Circuits

Purpose
Tools/Equipment
Prerequisite Procedures Circuit creation procedures in
Required/As Needed
Onsite/Remote
Security Level
Complete the
Step 1
to view the circuits. If you are already logged in, continue with Step 2.
Step 2 As needed, complete the
As needed, complete the
Step 3
As needed, complete the
Step 4
As needed, complete the
Step 5
As needed, complete the
Step 6
Stop. You have completed this procedure.

NTP-H70 View Cross-Connect Resource Usage

Purpose
Tools/Equipment
Prerequisite Procedures None
Required/As Needed
Onsite/Remote
Security Level
Step 1 Complete the
cross-connect card resource usage. If you are already logged in, continue with Step 2.
Click the Maintenance > Cross-Connect > Resource Usage tabs.
Step 2
Step 3 In the Summary section of the Resources Usage tab, view the following information:
•
•
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
6-2
This procedure allows you to locate and view ONS 15310-MA SDH
circuits. You can also export circuit data from the Circuits and Edit Circuits
windows.
None
Low-order Path Tunnels."
As needed
Onsite or remote
Retrieve or higher
"DLP-H29 Log into CTC" task on page 16-43
"DLP-H107 View Circuit Information" task on page
"DLP-H78 Search for Circuits" task on page
"DLP-H109 Filter the Display of Circuits" task on page
"DLP-H110 View Circuits on a Span" task on page
"DLP-H223 Export CTC Data" task on page
This procedure displays the percentage of cross-connect resources used by
circuits that traverse or terminate at an ONS 15310-MA SDH.
None
As needed
Onsite or remote
Retrieve or higher
"DLP-H29 Log into CTC" task on page 16-43
VC4 Matrix—Provides the percent of the cross-connect synchronous transport signal (VC
high-order path) resources that are used. For the 15310E-CTX-K9, 128 VC4 ports are available.
TUG3 Matrix—Provides the percent of the cross-connect synchronous transport signal (VC
Low-order path) resources that are used. For the 15310E-CTX-K9, 96 VC3 ports are available.
Chapter 6
Chapter 5, "Create Circuits and VC
on a node in the network where you want
17-9.
16-95.
17-12.
17-14.
18-20.
at the node where you want to view the
Manage Circuits
78-19416-01