Dlp-H134 Create Domain Icons - Cisco ONS 15310-MA SDH Procedure Manual

From the View menu, choose Go to Network View.
Step 1
Right-click the network or domain map and choose Set Background Image.
Step 2
Navigate to the graphic file you want to use as a background.
Step 3
Select the file and click Open. The graphic file appears as the CTC background image.
Step 4
As needed, complete the following to view and move the node icons:
Step 5
•
•
•
Return to your originating procedure (NTP).
Step 6

DLP-H134 Create Domain Icons

Purpose
Tools/Equipment
Prerequisite procedures
Required/As needed
Onsite/Remote
Security Level
All domain changes, such as added or removed nodes, are visible to all users who log into the network.
Note
Note To allow users of any security level to create local domains, that is, domains that are visible on the home
CTC session only, Superusers can change the CTC.network.LocalDomainCreationAndViewing NE
default value to TRUE. A TRUE value means any user can maintain the domain information in his or her
Preferences file, meaning domain changes will not affect other CTC sessions. (The default value is
FALSE, meaning domain information affects all CTC sessions and only superusers can create a domain
or put a node into a domain.) See the
page 14-18
Step 1 From the View menu, choose Go to Network View.
Right-click the network map and choose Create New Domain from the shortcut menu.
Step 2
When the domain icon appears on the map, click the map name and type the domain name.
Step 3
Press Enter.
Step 4
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-38
If the node icons are not visible, right-click the network view and choose Zoom Out. Repeat until
all of the node icons are visible.
If you want to reposition the node icons, drag and drop them one at a time to a new location on the
map.
It you want to change the magnification of the icons, right-click the network view and choose Zoom
In or Zoom Out. Repeat until the node icons appear at the magnification you want.
This task creates a domain icon to group ONS 15310-MA SDH icons in
CTC network view. By default, domains are visible on all CTC sessions that
log into the network.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Superuser only
to change NE default values.
"NTP-H137 Edit Network Element Defaults" procedure on
Chapter 17 DLPs H100 to H199
78-19416-01