Chapter 6 Manage Circuits; Before You Begin; Figure - Cisco ONS 15310-MA SDH Procedure Manual

Manage Circuits
This chapter explains how to manage Cisco ONS 15310-MA SDH electrical, optical, and Ethernet
circuits. To create circuits, see

Before You Begin

To clear any alarm or trouble conditions, refer to the Cisco ONS 15310-MA SDH Troubleshooting Guide.
This section lists the chapter procedures (NTPs). Turn to a procedure for applicable tasks (DLPs).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
78-19416-01
NTP-H69 Locate and View Circuits, page
NTP-H70 View Cross-Connect Resource Usage, page
NTP-H71 Modify and Delete Circuits, page
the active and standby colors of spans; change signal fail thresholds, signal degrade thresholds,
reversion time, and payload defect indication path settings for path protection circuits; or add or
delete a virtual concatenated (VCAT) member.
NTP-H72 Modify and Delete Overhead Circuits and Server Trails, page
to change a tunnel type, repair an IP circuit, or delete overhead circuits and server trails.
NTP-H73 Create a Monitor Circuit, page
bidirectional circuits.
NTP-H144 Create a J0 Section Trace, page
changes to circuit traffic.
NTP-H74 Create a J1 Path Trace, page
changes to circuit traffic.
NTP-H75 Create a J2 Path Trace, page
changes to circuit traffic on the CE-100T-8 card.
NTP-H129 Bridge and Roll Traffic, page
interrupting service.
NTP-H76 Reconfigure Circuits, page
NTP-H77 Merge Circuits, page
circuit.
C H A P T E R
Chapter 5, "Create Circuits and VC Low-order Path Tunnels."
6-2—Complete as needed.
6-3—Complete as needed to edit a circuit name; change
6-4—Complete as needed to monitor traffic on primary
6-5—Complete as needed to monitor interruptions or
6-7—Complete as needed to monitor interruptions or
6-7—Complete as needed to monitor interruptions or
6-10—Complete as needed to reroute live traffic without
6-11—Complete as needed to reconfigure (rebuild) circuits.
6-11—Complete as needed to merge two circuits into a master
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
6
6-2—Complete as needed.
6-4—Complete as needed
6-1