Figure - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 18 DLPs H200 to H299

Figure 18-6

Try to discover IP address changes—The wizard searches and displays the list of changed IP
•
addresses.
Note
• Apply the following IP change—Allows you to specify the changed IP address.
Select the node with changed IP address and specify old IP address as Original IP Address. The
wizard automatically displays the current IP address.
Step 5 Click Next.
If you selected "Try to discover IP address changes" option in
address changes that will be fixed, as shown in
78-19416-01
Server Trail Repair Wizard—Server Trail Repair Introduction
The wizard can discover multiple IP address changes. However, the wizard can repair only
one IP address change at a time. To repair multiple IP address changes, run the Server Trail
Repair wizard multiple times.
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
Step 4, then the wizard displays all the IP
Figure 18-7. Click Next.
18-93