Cisco ONS 15310-MA SDH Procedure Manual page 25

NTP-H37 Create an Automatically Routed E1 Circuit
NTP-H38 Create a Manually Routed E1 Circuit
NTP-H39 Create a Unidirectional E1 Circuit with Multiple Drops
NTP-H40 Create an Automatically Routed DS-3 or E3 Circuit
NTP-H41 Create a Manually Routed DS-3 or E3 Circuit
NTP-H42 Create a Unidirectional DS-3 or E3 Circuit with Multiple Drops
NTP-H46 Test Electrical Circuits
NTP-H43 Create an Automatically Routed VC Low-order Path Tunnel
NTP-H44 Create a Manually Routed VC Low-order Path Tunnel
NTP-H45 Create a VC Low-order Path Aggregation Point
NTP-H47 Create an Automatically Routed Optical Circuit
NTP-H48 Create a Manually Routed Optical Circuit
NTP-H49 Create a Unidirectional Optical Circuit with Multiple Drops
NTP-H50 Test Optical Circuits
NTP-H51 Create an Automatically Routed VCAT Circuit
NTP-H52 Create a Manually Routed VCAT Circuit
NTP-H55 Create Overhead Circuits
NTP-H140 Create a Server Trail
NTP-H179 Create an Overlay Ring Circuit
NTP-C186 Manually Create a CCAT or VCAT Circuit on the CE-MR-10 Card
NTP-H188 Create an Ethernet Drop and Continue Circuit
Manage Circuits
NTP-H69 Locate and View Circuits
NTP-H70 View Cross-Connect Resource Usage
NTP-H71 Modify and Delete Circuits
NTP-H72 Modify and Delete Overhead Circuits and Server Trails
NTP-H73 Create a Monitor Circuit
NTP-H144 Create a J0 Section Trace
NTP-H74 Create a J1 Path Trace
NTP-H75 Create a J2 Path Trace
NTP-H129 Bridge and Roll Traffic
NTP-H76 Reconfigure Circuits
NTP-H77 Merge Circuits
Monitor Performance
NTP-H64 Change the PM Display
78-19416-01
5-9
5-24
5-41
5-50
5-51
5-52
6-1
6-2
6-3
6-4
6-5
6-7
6-7
6-10
6-11
6-11
7-1
7-2
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
5-5
5-12
5-15
5-18
5-21
5-25
5-28
5-29
5-32
5-35
5-38
5-42
5-47
5-58
6-2
6-4
Figures
5-55
xxv