Dlp-H291 Automatically Configure The Snmpv3 Proxy Trap Forwarder Table - Cisco ONS 15310-MA SDH Procedure Manual

In the Manual Configuration of SNMPv3 Proxy Trap Forwarder dialog box, enter the following
Step 4
information:
•
•
•
•
•
•
Click OK to save the information.
Step 5
Return to your originating procedure (NTP).
Step 6

DLP-H291 Automatically Configure the SNMPv3 Proxy Trap Forwarder Table

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In network view, click Provisioning > SNMPv3 tabs.
Step 1
In the SNMPv3 Proxy Server area, complete the following:
Step 2
•
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
18-88
Remote Trap Source—Select the IP address from which the traps are sent. If the IP address is not
listed, enter the IP address manually.
Context Engine ID—Specify the context engine ID of the ENE from which traps need to be
forwarded. This field is automatically populated if the source of trap is selected. If the source of trap
is not specified, you need to manually enter the context engine ID.
Target Tag—Specify the tag name. The tag identifies the list of NMS that should receive the
forwarded traps. Traps are forwarded to all GNE Trap destinations whose proxy tags list contains
this tag.
Remote User Details
User Name—Specify the user name.
–
Security Level—Select the security level for the user. The options are noAuthNoPriv,
–
AuthNoPriv, and AuthPriv.
Authentication—Select the authentication algorithm.
Protocol—Select the authentication algorithm you want to use. The options are NONE, MD5,
–
and SHA. Default is None.
Password—Enter the password if you select MD5 or SHA.
–
Privacy—Enables the host to encrypt the contents of the message that is sent to the agent.
Protocol—Select NONE or DES as the privacy authentication algorithm. Encryption is disabled
–
if NONE is selected.
Password—Enter the password if you select DES. The password should not exceed 64
–
characters.
This procedure creates an entry in the SNMPv3 Proxy Trap Forwarder
Table automatically.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite
Provisioning or higher
Select the GNE to be used as the SNMPv3 proxy server from the drop-down list.
Chapter 18 DLPs H200 to H299
78-19416-01