Replace (Remove and Install) Fan Tray
Figure 30: Installing the SSD 2.5-inches drives
1
2
Replace (Remove and Install) Fan Tray
1. Remove the top cover.
2. Remove the two screw that secure the fan tray in the chassis.
3. Disconnect the fan cables from the motherboard.
4. Remove the fan tray by lifting up out of the chassis.
5. To install, perform these operations in reverse.
Cisco Catalyst 8300 Series Edge uCPE Hardware Installation Guide
40
Screws
SSD 2.5" Drives
Install and Upgrade Field Replaceable Units