Dlp-H96 Set Auto Refresh Interval For Displayed Pm Counts - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 16 DLPs H1 to H99
Return to your originating procedure (NTP).
Step 7

DLP-H96 Set Auto Refresh Interval for Displayed PM Counts

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click an electrical, Ethernet, or 15310E-CTX-K9 card. The card view appears.
Step 1
Note
Click the Performance tab.
Step 2
•
•
•
Click the Auto-refresh drop-down list and choose one of six options:
Step 3
•
•
•
•
•
•
Click Refresh. The PM counts for the newly selected auto-refresh time interval appear.
Step 4
Depending on the selected auto-refresh interval, the displayed PM counts automatically update when
each refresh interval completes. If the auto-refresh interval is set to None, the displayed PM counts are
not updated unless you click the Refresh button.
Return to your originating procedure (NTP).
Step 5
78-19416-01
In an ONS 15310-MA SDH node, the 15310E-CTX-K9 card provides optical ports and the
E1_21_E3_DS3_3 and E1_63_E3_DS3_3 cards provide electrical ports. The ONS 15310-MA
SDH supports Ethernet cards.
To set the auto-refresh interval for optical ports click the Optical tab.
To set the auto-refresh interval for electrical ports click the E1, DS3, or E3 tabs.
To set the auto-refresh interval for ML-Series and CE-Series Ethernet cards click the Ether Ports >
Statistics tabs or POS Ports > Statistics tabs.
None: This option disables the auto-refresh feature.
15 Seconds: This option sets the window auto-refresh to 15-second time intervals.
30 Seconds: This option sets the window auto-refresh to 30-second time intervals.
1 Minute: This option sets the window auto-refresh to 1-minute time intervals.
3 Minutes: This option sets the window auto-refresh to 3-minute time intervals.
5 Minutes: This option sets the window auto-refresh to 5-minute time intervals.
This task changes the window auto-refresh intervals for updating the
displayed PM counts.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
16-113