Install And Remove Sfp And Sfp+ Modules - Cisco Catalyst 8300 Series Hardware Installation Manual

Install Internal Components and Field Replaceable Units
Step 4
Install the top cover
Step 5 If appropriate, re-install the unit back in an equipment rack
Step 6
Reinstall all cables from the chassis
Step 7 Power on the unit
1 F a n 2 Screws
tray

Install and Remove SFP and SFP+ Modules

Before you begin
See the Cisco Catalyst 8300 Series Edge Platforms's
SFP+ modules. Use only supported SFP/SFP+ modules on the platform.
Warning
Note
Class 1 laser product. Statement 1008
We recommend that you wait 30 seconds between removal and insertion of an SFP on an interface
module. This time is recommend to alllow the transceiver software to initilize and synchronise with the
standby RSP. Chaning an SFP more quickly could result in transceiver initialization issues that disable
the SFP
Hardware Installation Guide for Cisco Catalyst 8300 Series Edge Platforms
Install and Remove SFP and SFP+ Modules
datasheet on cisco.com for a list of supported SFP and
89