Figure 17-2 Reinitialization Tool In Windows - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199
Figure 17-2
Complete the following fields:
Step 5
GNE IP—If the node you are reinitializing is accessed through another node configured as a gateway
•
network element (GNE), enter the GNE IP address. If you have a direct connection to the node, leave
this field blank.
• Node IP—Enter the node name or IP address of the node that you are reinitializing.
User ID—Enter the user ID needed to access the node.
•
Password—Enter the password for the user ID.
•
Upload Package—Check this box to send the software package file to the node. If unchecked, the
•
software stored on the node is not modified.
Force Upload—Check this box to send the software package file to the node even if the node is
•
running the same software version. If unchecked, reinitialization will not send the software package
if the node is already running the same version.
• Activate/Revert—Check this box to activate the uploaded software (if the software is a later than the
installed version) or revert to the uploaded software (if the software is earlier than the installed
version) as soon as the software file is uploaded. If unchecked, the software is not activated or
reverted after the upload, allowing you to initiate the functions later from the node view
Maintenance > Software tab.
Confirm—Check this box if you want a warning message displayed before any operation is
•
performed. If unchecked, reinitialization does not display a warning message.
Database restore—Check this box if you want to send a new database to the node and to restore node
•
provision values. (This is equivalent to the CTC database restore with the "Complete Database"
check box unchecked.)
Complete database restore—Check this option to send a new database to the node and to restore
•
node provision and system values. (This is equivalent to the CTC database restore with the
"Complete Database" check box checked.)
No database restore—Check this box if you do not want the node database to be modified.
•
Search Path—Enter the path to the CISCO15310 folder on the CD drive.
•
78-19416-01
Reinitialization Tool in Windows
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-61