Ntp- H189 View Shelf Temperature - Cisco ONS 15310-MA SDH Procedure Manual

Required Tools and Equipment
Connect the chassis to the office ground. For detailed instructions on grounding, refer to the
Step 2
Electrostatic Discharge (ESD) and Grounding Guide.
Step 3 Complete the
Complete the
Step 4
page
Step 5 Continue with the
Stop. You have completed this procedure.
NTP-H189 View Shelf Temperature
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In shelf view, click the Provisioning > General > Voltage/Temperature tabs. The Voltage/Temperature
Step 1
pane appears.
The Voltage/Temperature pane retrieves the temperature of the shelf in degrees Celsius.
Step 2
Click the Reset button to refresh the temperature value.
Step 3
Stop. You have completed this procedure.
NTP-H152 Install the Fan-Tray Assembly
Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
1-14
"DLP-H251 Connect Office Power to the ONS 15310-MA SDH" task on page
"DLP-H252 Turn On and Verify Office Power to the ONS 15310-MA SDH" task on
18-53.
"NTP-H152 Install the Fan-Tray Assembly" procedure on page
This procedure displays the shelf temperature of the ONS 15310-MA SDH
chassis in CTC.
None
DLP-H29 Log into CTC, page 16-43
As Needed
Remote
Provisioning or higher
This procedure installs the air filter and fan-tray assembly in the
ONS 15310-MA SDH.
#2 Phillips screwdriver
Fan-tray assembly
Fan filter
NTP-H151 Install the Power and Ground, page 1-12
Required
Onsite
None
Chapter 1 Install the Cisco ONS 15310-MA SDH
1-14.
Cisco ONS
18-52.
78-19416-01