NXP Semiconductors PN7462 series User Manual page 88

NXP Semiconductors
Bit Symbol
17:16
TEMP_DELTA_0
15:12
TEMP_CAL_FINE_1
11:8
TEMP_CAL_COURSE_1
7:4
TEMP_CAL_FINE_0
3:0
TEMP_CAL_COURSE_0
Table 79. PCR_HOSTIF_WAKEUP_CFG_REG (address offset 0x1C)
Bit Symbol
31:9 RESERVED
8:2 I2C_ADDR
1 RESERVED
0 EN_INTERFACE
Table 80. PCR_WAKEUP_CFG_REG (address offset 0x20)
Bit Symbol
31:23 RESERVED
22 EN_ADV_RFLD
21 EN_VBUS_LOW
20:11 WUC_VALUE
10 EN_TVDD_MON
9
EN_INT_AUX
8 EN_CT_PR
7 RESERVED
6 EN_PVDD_LIMITER
5 EN_GPIO_INT
4 EN_TEMP1
3 EN_TEMP0
2 EN_RFLDT
1 RESERVED
0 EN_WUC
Table 81. PCR_GPIO_WAKEUP_CFG_REG (address offset 0x24)
Bit Symbol
31:12 RESERVED
UM10858
User manual
COMPANY PUBLIC
Access Value Description
Selects temperature threshold detection for temperature
sensor 0
rw 0x01
Trim value fine for temperature sensor 1
rw 0x08
Trim value course for temperature sensor 1
rw 0x08
Trim value fine for temperature sensor 0
rw 0x08
Trim value course for temperature sensor 0
rw 0x08
Access Value Description
rw 0x00 Reserved
rw 0x00 I2C address for wake-up
rw 0x00 Reserved
rw 0x00 1- Enable Wake-up host interface
Access Value Description
rw 0x00 Reserved
rw 0x00 1: Enable advanced RFLD level detector FSM.
rw 0x00 1: Enable wake-up when vbus goes low
rw 0x00 Wake-up timer value
rw 0x00 1: Enable wake-up from TVDD 5 V monitor
1: Enable wake-up is TDA (CTUART) gives a level high
rw 0x00 interrupt
rw 0x00 1: Enables wake-up if card is detected.
rw 0x00 Reserved
rw 0x00 1: Enables wake-up if PVDD current limiter is risen
rw 0x00 1: Enables wake-up if GPIO gives any input
rw 0x00 1: Enable temperature 1 error Wake-up
rw 0x00 1: Enable temperature 0 error Wake-up
rw 0x00 1: Enable Wake-up RF level detector
rw 0x00 Set to "0"
rw 0x00 1: Enable Wake-up timer
Access Value Description
rw 0x00 Reserved
All information provided in this document is subject to legal disclaimers.
Rev. 1.4 — 14 May 2018
314514
UM10858
PN7462 family HW user manual
© NXP B.V. 2018. All rights reserved.
88 of 345